M 32 C Generator set
As a generator set the M32 is available in a 50Hz and 60Hz version. The 50Hz version has an output range from 2,880 kWe (6M32C) to 4,320 kWe (9M32C) at 600 revolutions per minute. The output of the 60 Hz version ranges from 2,765 kWe (6M32C) to 4,147 kWe (9M32C) at 600 revolutions per minute.
For more information about the M32 as a generator set download following documents or visit www.marine.cat.com.
kW2.880 - 4.500
g/kW178 - 179
Dimensions and weight
Removal of cylinder liner:
in transverse direction: 4940mm
in longitudinal direction: 5305mm
Nozzle position: ask for availability
Engine with turbocharger at driving end available, ask for dimensions
Nodular cast iron engine block and crankcase with integrated ducts for lubricating oil and charge air
Engine block with lucbricating oil supply to the crankshaft, camshaft control system and camshaft bearings through drilled ducts.
Simplified parts spectrum by using single-pipe exhaust gas ducting
Low weight, low installation volume and low vibration level.
Cooling water system with simple plug-in connections
Easy to fit, very maintenance-friendly cooling water system with a reduced number of components/parts and increased operational safety.
Pulse charging system, available as an option, for all in-line engine variants
Pulse charging system with optimum engine acceleration and advantages in marine propulsion systems subject to frequent changes of load.
Corrosion-free turbocharger with low temperature level of components surrounding the combustion chamber.
Cylinder liner, only cooled outside the engine block
Long life cylinder liner with low wear rate due to calibration ring and low and constant lubricating oil consumption.
Segmental camshaft design
Simple to assemble and dismantle camshaft with individual segments per cylinder.
Installation-friendly, because of pumps and filters installed on the engine
Lubricating oil automatic filter fitted to the engine.
Connecting rod, split off design
High level of operational safety, the result of accurately preloaded bolts.
Compact module for lower valve drives and injection pump drives with cam followers
Exact straight-line guidance for low-friction and low-wear operation.
Compact cylinder head design
Simple and fast assembly/dismantling of compact cylinder head design with long intervals between overhauls.